ductcleaningguideweb

 Air duct cleaning involve a number of steps that will ensure people living in the premise are able to breath good quality of air, be it at home or in the office. This article will provide you an overview of what are these steps that are related to air duct cleaning. If molds are left untreated this might cause greater problems in the future. 

Prior cleaning evaluate the condition of the air ducts

As much as possible you need to be aware of the possible problems on the ventilation system of your unit so that you can avoid getting into bigger problems in the future. It is a wise move on your part to seal any leakage on the air ducts, this way you can avoid spending more on the Dryer Repairs Paterson services. If there are clogged filters then the best thing to do is replaced it with an efficient pleated filter or an electrostatic filter. Before cleaning the air ducts, it would be best if you check for any mold formation in the air duct system. If you are using a metal sheet for the ductwork then you must apply biocide when cleaning it but if it is fiberglass then avoid doing so. 

Negative Pressure - ideal way of cleaning the air ducts

When cleaning the air ducts, it would be best to utilize negative pressure, this way dirt and other particles that clogged in the air ducts are removed. If you want to be far from breathing polluted air then you have to make sure dust particles and released to the outdoor air. More often than not, the entire system is subject to negative pressure to remove dirt and clogged particles prior the cleaning process. 

Cleaning of the Ductwork

The first thing that must be cleaned are the conduits found in the entire system. When cleaning the ductwork, they must utilize cleaning tools like nylon brushes along with a specialized vacuum for the system. For ductwork made from fiberglass,  soft-bristled brushes is highly recommended. If you are using ductwork made from insulated material then you need to make sure it doesn't get wet so that mold formation can be avoided, if mold starts to form then replacing it is your best option. In order for the cleaning process to be done in no time, return registers must be done in order to remove polluted air. It is vital on your part to apply sealants whenever fixing ductwork made from fiberglass or if there are leakages on the air ducts, it is also a must on your part to apply the latter after the cleaning process at http://njairquality.com/#!us-vs-them

Clean other parts of the System

 

Some of the other parts that must be cleaned are the coil drain pans, humidifier, combustion chamber, blower blades, the heat exchanger surface, plenum, cooling coil, and other important parts of the HVAC system.